how to wear usb headset?

Features of call center headsets include suitability for long-term wear, clear call quality, noise cancellation, stable signal, and increased durability. Call center headsets generally do not have L/R markings; you can wear them according to your own preference. So how do you wear and use them correctly?

Correct wearing steps:
1. Adjusting the headband

• Hold both ends of the headset with both hands, pull the headband apart to a width slightly greater than your head width, place the headband on your head from front to back, and then fine-tune it to fit the sides of your head. It should feel snug but not constricting;
• Always use both hands to put on and take off the headset, as using only one hand can cause excessive pulling force and potentially break the headband;
• Wear it centrally; the headband should rest steadily on the top center of your head, distributing most of the weight.

2. Microphone position

• Rotate the microphone boom to near your mouth. It is generally recommended that the optimal pickup angle for the main microphone is 45-60 degrees (relative to the midline of the mouth); the microphone head should be about 1-2 fingers (2-3 cm) away from your mouth;
• Ensure the microphone hole is facing your mouth, which is crucial for clear sound pickup. Avoid placing the microphone near your nostrils or below your chin.

3. Wearing the earcups

• On-ear headsets usually have a certain degree of self-adapting design for the earcups. For example, some headsets have universally adjustable earcups or headphone arms that can rotate 180°. When wearing, gently press/rotate them to fit the sides of your head and ears;
• After wearing, gently press the edges of the earcups with your fingers to check for any noticeable gaps.

4. Positioning the in-line control

• Let the in-line control hang naturally, rather than holding it in your hand. The microphone being too far from your mouth, or the distance between the microphone and the in-line control being too short, can affect sound quality. This is a result we obtained after countless tests.

Benefits of wearing headphones correctly:

1. Achieve optimal call quality. The correct angle and distance of the microphone effectively capture your clear and full voice.
2. Enjoy a more comfortable experience. Even pressure distribution and appropriate tightness significantly reduce pressure on the head and ears.
3. Enhance noise cancellation. The best noise cancellation effect (ENC) is achieved only with the correct distance and angle.
4. Protect your hearing. Well-fitting earcups effectively block out ambient noise, preventing hearing damage caused by prolonged use at high volume.

Keywords: usb headphones, wired headphones, Over-ear headphones, factory headphones, usb headphones with microphone